manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 140 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 140

4

4-44

ENTERING & SETTING ITEMS

3. ENTERING VARIOUS FUNCTIONS (Cont.)

Reception Reduction Setting

1

Displaying the RX REDUCTION Menu.

Press: 

 then 

 

 

 

 

 

2

Select the RX Reduction option.

• To set RX Reduction to OFF, press 

.

• To set RX Reduction to ON, press 

.

This function allows the reduction of the received image, if the received document is larger than the
effective printing area of the recording paper.

Reception Discard Setting

1

Displaying the DISCARD Menu.

Press: 

 then 

 

 

 

 

 

2

Select the Discard option.

• To set Discard to OFF, press 

.

• To set Discard to ON, press 

.

This function allows the lower portion of the document to be discarded, if the document is larger than the
recording paper.

* To change this dimension, contact your service representative.

RX REDUCTION

1.OFF

2.ON

DISCARD

1.OFF

2.ON

FAX SETUP

18.RX REDUCTION

19.DISCARD

20.PRIVILEGED RX

FAX SETUP

19.DISCARD

20.PRIVILEGED RX

21.RTI

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments