Toshiba e-studio 16, Operator'S Manual, Page: 116 / 207

4-20
ENTERING & SETTING ITEMS
4
1 Display the EXCHANGE TYPE Menu.
Press: then
Exchange Type Entry (EU MODEL ONLY)
Connection to PABX, obtaining a public line/Digital PABXs
The fax unit can be connected not only to the public switched telephone network (public line) but also to
a PABX. In this case, additional parameters have to be entered.
With PABXs, the public line is obtained in various ways:
• Number
Dial one digit (or several digits) in order to obtain the public line
• Flash key With this method of obtaining the public line, the connection circuit is interrupted briefly.
When the method of obtaining a public line has been entered, you must always press key before
the actual number when you dial your fax partner. This is also applicable for saving the fax numbers.
2 Select the EXCHANGE TYPE.
• To select “1.PSTN,” press .
Return to FAX SETUP Menu.
• To select “2.PABX,” press .
3. ENTERING VARIOUS FUNCTIONS (Cont.)
EXCHANGE TYPE
1.PSTN
2.PABX
EXCHANGE TYPE
1.FLASH
2.DIGIT
3
Select the ACCESS TYPE.
• To select “1.FLASH,” press .
Return to FAX SETUP Menu.
• To select “2.DIGIT,” press . Go to step 4.
EXCHANGE TYPE
SET ACCESS DIGIT
ACCESS DIGIT = (1-3)
FAX SETUP
05.DIAL TYPE
06.REDUAK MODE
07.AUTO RECEIVE MODE
4 Enter the digit(s) for obtain public line.
• Enter the digit(s) then press key.