manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 36 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 36

2

2-10

BASIC OPERATION

5. HOW TO SET SCANNING CONDITIONS

• Set the resolution according to the size of the text in the original  that you are to send.

If you do not set the resolution, the original is sent at the resolution set in the Default Setting for
Document Mode. ( 

 See page 4-24.)

STANDARD: Select this setting when the text in the original is regular size.
FINE:

Select this setting when the text in the original is small or you are sending a detailed
drawing.

U-FINE:

Select this setting when the text in the original is particularly small or you are sending a
precision drawing.

Tip

If the remote FAX cannot receive originals at the same resolution, the resolution of the sent original
is automatically converted before it is sent.  The finer the resolution, the longer it takes to send an
original.

How to Set the Resolution

2

Press the 

 key with the initial screen shown

in the FAX mode.

3

Use the 

 or 

 key to select the desired

resolution mode.

Press the 

 key to complete the setting.

•  To cancel setting midway, press the 

 key.

ENTER TEL NUMBER(MAX128):

RESOLUTION :

STANDARD

FINE

U-FINE

ENTER TEL NUMBER(MAX128):

RESOLUTION:

STANDARD

FINE

U-FINE

1

Press the 

 key.

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments