manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 169 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 169

4-73

4

File number of the relay transmission (indicated in 3 digits (001 ~ 999))

Date and time when the relay transmission was performed

Number of transmitted pages (indicated in 3 digits (001 ~ 999); more than 1000 is
indicated as “999”.)

Time when the relay transmission to the end station started

Time when the relay transmission to the end station was completed

Relay box number

Relay group to which the relay transmission was performed normally.
The abbreviated dial number, one touch number, and multi-address transmission group

number, are indicated.  (Max. of 100 addresses can be included in the relay box.)  When

one touch number is used and sub-address dial is used, the mark “ ” is placed.  When

one touch number or abbreviated dial number in which an E-mail address is registered, is

used, the mark “

” is added.

Relay group to which the relay transmission was not completed normally.

The abbreviated dial number, one touch number, multi-address transmission group

number and name, and number of transmitted pages before an error occurred, are

indicated.

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments