manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 90 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 90

3

3-26

HANDY FEATURES

8. POLLING COMMUNICATIONS (Cont.)

For details on how to specify remote FAXes using Multi-polling RX

4

Enter the 4-digit security code for the document to

be retrieved and press the 

 key.

3

Select the Security Option.

• If the remote FAX is a TOSHIBA FAX and a 4-digit code is

programmed to the document to be polled, press

.  Go to Step 4.

• If the remote FAX is not a TOSHIBA or a security code is not

used, press 

.  Go to Step 5.

2

Displaying the POLLING Menu and select POLL.

Press: 

 then 

In a Multi Polling operation, the documents are retrieved from multiple remote FAXes using pre-
programmed groups, One Touch Keys, Abbreviated Dial, or from the Dial Keypad.

POLLING

SECURITY CODE ?

1.YES

2.NO

POLLING

SECURITY CODE:

POLLING

ENTER TEL NUMBER OR,

PRESS SPEED DIAL KEY

OR ONE TOUCH KEY

5

Press the 

 key (on the Function key panel).

MULTI GROUP               000

ENTER TEL NUMBER OR,

PRESS SPEED DIAL KEY

OR ONE TOUCH KEY

6

Specify the remote FAX number.

• Enter the numbers of the remote FAXes using any

combination of the dialing method until all remote FAXes
are entered.

1

Press the 

 key.

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments