manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 144 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 144

4

4-48

ENTERING & SETTING ITEMS

3. ENTERING VARIOUS FUNCTIONS (Cont.)

Setting the Page Count

When this function is set to ON, the designated number of pages will be printed at the top of the recording
paper at the remote station.
• This setting is available when the originals are loaded into the ADF or RADF but not when the document

glass is used.

• It will also assist the recipient to track the number of pages as it will add a page count to the TTI at the

top of your transmitted pages (i.e., 001/005, 002/005, 003/005, etc.).

• The facsimile will compare the number of pages actually sent with the number you entered.

2

Load the original on the document feeder.

3

Set the scanning conditions. ( 

 See pages 2-10 to

2-15.)

4

Press the 

 key to display the COMM. OPTIONS.

5

To select “5. PAGE NUMBER,” press 

.

6

Enter the number of original pages (1 to 999) and

press the 

 key.

7

Specify the remote FAX. ( 

 See pages 2-10 to

2-15.)

ENTER TEL NUMBER(MAX128):

FEB25-2001 11:30AM  M

:100%

RESOLUTION:STANDARD 

:AUTO

COMM.OPTION

1.SECURITY TX

:OFF

2.ECM

:ON

3.LONG ORIGINAL

:OFF

4.LINE MONITOR

:OFF

1

Press the 

 key.

PAGE NUMBER

PAGE NUMBER(1-999):

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments