manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 55 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 55

2-29

2

3

Select the Print Number.

• To print the 50 communications (1 page), press 

.

• To print the 100 communications (2 pages), press 

.

• To print the 150 communications (3 pages), press 

.

• Transmission report print out. For details on how to read

reports, see the “Transmission Journal.”

(

 See pages 4-61 and 4-62.)

2

Press the 

 key.

• Print out the Transmission Journal to check the transmission results.  The Transmission Journal is

printed by the following operation as the default.  You can set to print the Transmission Journal
automatically as well. ( 

 See page 4-53.)

• You can select either printing only the Transmission Report, printing only the Reception Report, or

printing both the Transmission Report and Reception Report.  Both the Transmission Report and
Reception Report are printed as the default.

• In the Transmission Journal, you can check the following information relating to transmission in the

memory TX and direct TX modes:
- Serial number

- Job number

- Communications start date

- Communications time (Minutes/Seconds)

- Number of originals

- Destination

- Department Number

- Account number

- Communication mode

- Result

Checking Transmission Results by Printing Reports

ENTER TEL NUMBER(MAX128):

Printing list

RESOLUTION:STANDARD  

:AUTO

COMM.OPTION

PRINT NUMBER

1.1-50  (1 PAGE)

2.1-100 (2 PAGES)

3.1-150 (3 PAGES)

1

Press the 

 key.

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments