manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 39 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 39

2-13

2

Manual Image Density Mode Setting Procedure

2

Press the 

 key.

5

Press the 

 key to complete the setting.

• To cancel setting midway, press the 

 key twice.

4

Press 

 or 

 key to set the image density manually.

• To lighten the contrast, press the 

 key.

Each press of this key moves the scale to the left to lighten

the contrast.

• To darken the contrast, press the 

 key.

Each press of this key moves the scale to the right to darken

the contrast.

ENTER TEL NUMBER(MAX128):

LIGHT

AUTO

/DARK:

MANUAL

3

Select MANUAL by pressing the 

 key and press

the 

 key.

ENTER TEL NUMBER(MAX128)

FEB25-2001 11:30AM  M

:100%

RESOLUTION:STANDARD 

:NORMAL

COMM.OPTION

LIGHT/DARK

MANUAL:

-3 -2 -1 0

+1 +2 +3

 

1

Press the 

 key.

ENTER TEL NUMBER(MAX128):

LIGHT

AUTO

/DARK:

MANUAL

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments