manualshive.com logo in svg

Toshiba e-studio 16, Operator'S Manual, Page: 70 / 207

Share
Download
Toshiba e-studio 16 Operator'S Manual Download Page 70

3

3-6

HANDY FEATURES

4. LOW SPEED TRANSMISSION

If communication errors frequently occur while transmitting documents due to bad phone lines, we
recommend you to select a lower transmission speed to enable quality transmissions.
• The transmission speed will be restored to the default value automatically after the low speed

transmission is completed.

4

Specifying the remote FAX and press the 

 key.

( 

 See pages 2-16 to 2-21.)

3

Select the desired bit rate.

• To select OFF, press 

.

• To select 14400 BPS, press 

.

• To select 9600 BPS, press 

.

• To select 4800 BPS, press 

.

QUALITY TX

1.OFF

2.14400 BPS

3. 9600 BPS

QUALITY TX

2.14400 BPS

3. 9600 BPS

4. 4800 BPS

1

Press the 

 key.

2

Press the 

 key (on the Function key panel) and

resend the original.

Note

LOW SPEED TX takes longer than regular transmission as
the documents are sent at a slower bit rate.

Summary of Contents for e-studio 16
















































































































































































































Reviews:

No comments