Toshiba B-EX6T Series Page 136 Key Operation Specification Download

Page: 136 / 160

135

9.10.4.7 CALIB. AGC

By performing an RFID calibration, an AGC (response wave intensity from an RFID tag) value is
automatically obtained and set.

Max.

value

Min. value

Step

Display

Sign

Integer

digit

Decimal

place

0-padding

Unit of

measure

Decimal

None

Notes:

1. This parameter is effective only when the CALIB. MODE parameter is set to ON.

2. Data write/read is performed only for the tags having the AGC value equal to or larger than the AGC value

set for this parameter. When the AGC value is less than the one set for this parameter, RFID WRITE

ERROR occurs.

3. For details of the RFID calibration, refer to Section 6.7 RFID CALIBRATION.

9.10.4.8 CALIB. POSITION

By performing an RFID calibration, an optimum data read/write position (distance from the home position) is

automatically obtained and set.

Max.

value

Min. value

Step

Display

Sign

Integer

digit

Decimal

place

0-padding

Unit of

measure

+999.9

-999.9

0.1

Decimal

None

Notes:

1. This parameter is effective only when the CALIB. MODE parameter is set to ON.

2. The printer will automatically feed RFID media forward/backward for the distance specified by CALIB.

POSITION parameter before writing/reading RFID tag, which is normally performed with @003 command.

3. The feed direction is indicated by

“+” (backward) and “



“ (forward).

4. Setting values ranging from -2.9mm to +2.9mm do not reflect the read/write position fine adjustment.

5. For details of the RFID calibration, refer to Section 6.7 RFID CALIBRATION.

9.10.4.9 ANTENNA POSITION

This parameter, used for an RFID calibration, is to select the combinational position of the RF antenna and

the wave director.

・

FRONT

・

CENTER

・

REAR

Antenna position

Antenna rotation

Wave director position

Application

FRONT

0°

0 mm

Usable

CENTER

Unusable

REAR

Unusable

Notes:

1. A

“usable” antenna position must be selected for this parameter.

2. If an RFID calibration is performed with

“Unusable” antenna position selected, the printer operation is

not guaranteed. (Refer to Section 6.7.1 Outline of the RFID Calibration.)

3. For details of the RFID calibration, refer to Section 6.7 RFID CALIBRATION.

Summary of Contents for B-EX6T Series

































































































































































Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands

Toshiba B-EX6T Series, Key Operation Specification

Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands