Toshiba B-EX6T Series Key Operation Specification Download

Page: 143 / 160

142

9.13 FACTORY TEST

Contents of FACTORY TEST menu

Menu item

<10>FACTORY TEST

HEAD UP ADJUST

PANEL TEST

KEY TEST

9.13.1 HEAD UP ADJUST

The head-up solenoid is turned on for 10 seconds.

9.13.2 PANEL TEST

The LCD test is performed in the following order.

(Start)



Backlight test



Missing dot test



Character display test



Contrast test



(End)

The display language is English regardless of the LCD Language parameter setting.

LCD

Operation and LCD/LED status

Backlight test

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns off.

Press any key.

Missing dot test

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

1-dot line is displayed along the edges of the

LCD.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

All LCD dots are on.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

All LCD dots are off.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

1-dot check pattern is displayed. The upper left

corner dot is black.

Press any key.

Summary of Contents for B-EX6T Series

































































































































































Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands

Toshiba B-EX6T Series, Key Operation Specification

Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands