60
ON:TAG:
The ribbon saving module is used.(Head lever position:
“TAG”)
ON:LABEL: The ribbon saving module is used. (Head lever position:
“LABEL”)
PRE PEEL OFF [ ]
[Description] Whether to enable the pre-peel-off function
[Values to be printed]
OFF: Enabled.
ON:
Disabled.
BACK FEED SPEED [ ]
[Description] Reverse feed speed
[Values to be printed]
STD: 3 ips
LOW: 2 ips
CALIBRATION [ ]
[Description] Automatic calibration
[Values to be printed]
OFF:
Disabled.
ON TRANS.: Auto calibration is performed with transmissive sensor.
ON REFL.:
Auto calibration is performed with reflective sensor.
ON ALL:
Auto calibration is performed with both sensors.
ON TRAS+BF: Auto calibration is performed with transmissive sensor, then the media is reversely fed.
ON REFL+BF: Auto calibration is performed with reflective sensor, then the media is reversely fed.
ON ALL+BF: Auto calibration is performed with both sensors, then the media is reversely fed.
CODE PAGE [1] [2]
[Description 1] Character code selection
[Value to be printed 1]
PC-850
PC-852
PC-857
PC-8
PC-851
PC-855
PC-1250
PC-1251
PC-1252
PC-1253
PC-1254
PC-1257
LATIN9
Arabic
PC-866
UTF-8
[Description 2] Character
“0” selection
[Values to be printed]
0:
with slash
Ø: without slash
CTRL CODE [ ]
[Description] Control code type
[Values to be printed]
AUTO:
Automatic selection
{,|,}:
{,|,} method
ESC,LF,NL: ESC,LF,NL method
MANUAL:
Any code (Described in hex. code)
