Toshiba B-EX6T Series Page 129 Key Operation Specification Download

Page: 129 / 160

128

・

HF band(H2)

B-EX700-RFID-H2-R

B-EX700-RFID-H3-QM-R

・

UHF band (U2/U4) B-EX700-RFID-U2-EU-R (Europe,India)

B-EX700-RFID-U2-US-R (U.S.A, Australia, Taiwan, Korea)

B-EX700-RFID-U4-R (Japan)

B-EX700-RFID-U4-EU-R (Europe)

B-EX700-RFID-U4-US-R (Korea)

B-EX700-RFID-U4-AU-R (Australia)

U4 module preinstall model

(B-EX4T1/T2-GS18/TS18-CN-R) (China)

Note: This setting will become effective after the printer power is turned off, and back to on.

9.10.2.2 COUNTRY

When the module type is set to

“U4”, the country code of the currently installed module is displayed.

If the module type is set to other than

“U4”, “INVALID” is displayed.

It is possible to change the country setting only when the module type is set to

“U4” and the actually installed

module is US or EU or AU. However, this menu is password-protected because changing the country setting

causes the output frequency to change.

The following message is displayed depending on the module type setting, the mounted module type, and the

module mount condition.

B-EX6T1/T3

Module Type

parameter

Module type and status

Message

NONE

No module installed.

NONE

U2/U4

No module installed.

No RFID Module

B-EX706-RFID-U4-R

B-EX706-RFID-U4-EU-R

B-EX706-RFID-U4-US-R

B-EX706-RFID-U4-AU-R

No country

setting

Need Setting for use

[ENTER] for Setting

B-EX4T1

Module Type

parameter

Module type and status

Message

NONE

No module installed.

NONE

B-EX700-RFID-H1-QM-R

B-EX700-RFID-H2-R

B-EX700-RFID-H3-QM-R

INVALID

U2/U4

No module installed.

No RFID Module

B-EX700-RFID-U2-EU-R

B-EX700-RFID-U2-US-R

B-EX700-RFID-U4-R

B-EX700-RFID-U4-EU-R

B-EX700-RFID-U4-US-R

B-EX700-RFID-U4-AU-R

U4 module preinstall model

Set the country

[ENTER] for Setting

No country

setting

Need Setting for use

[ENTER] for Setting

Summary of Contents for B-EX6T Series

































































































































































Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands

Toshiba B-EX6T Series, Key Operation Specification

Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands