52
Outline of the top menu
<0>RESET
Restart the printer.
<1>DIAGNOSTIC
Perform self diagnosis, print out the result, check for the print head broken
elements.
<2>SET PARAMETERS
Set the parameters for printer functions
<3>TEST PRINT
Test print quality by printing slant lines, characters and barcodes.
<4>SENSOR
Display the ambient temaprature and print head temparature, and adjust each
level of the media sensors.
<5>RAM CLEAR
Clear the maintenance counter and parameter settings.
<6>INTERFACE
Set the interface parameters such as network, USB, RS232C and parallel.
<7>RFID
Set the RFID-related parameters.
<8>RTC
Set the date & time of the real time clock and choose a real time renewal timing.
<9>USB MEMORY
Copy data (including firmware) to/from USB memory.
<10>FACTORY TEST
Adjust the printer before shipment.
<11>BASIC
Set the functions of the BASIC program to be downloaded to the printer.
<12>Z-MODE
Same as BASIC function.
<13>XML
Set XML functions.
<14>LCD PANEL
Select a language for the display, choose the items to be displayed, and adjust the
contrast.
9.2 REFLECTING THE SYSTEM MODE SETTINGS TO THE PRINTER
The settings configured in the system mode or user system mode is saved in the printer at the following timings.
・
Periodic saving at 20-msec. interval
・
When Reset menu in the system mode or user system mode is performed
The changes in the settings, with a partial exception, take effect at a power on time or after a reset.
9.3 RESET
Reset the printer.
Contents of RESET menu
Menu item
<0>RESET
9.4 DIAGNOSTIC
Contents of the DIAG. menu
Menu item
<1>DIAGNOSTIC
MAINTENANCE COUNTER
AUTO DIAGNOSTIC
HEAD CHECK
