126
9.10 RFID
Contents of RFID menu
Menu item
<7>RFID
TEST
MODULE
RETRY
UHF SETTING
OTHER
CARRIER SENSE
9.10.1 TEST
RFID tag data related to the test is read.
Menu item
<7>RFID
TEST
ID READ
9.10.1.1 ID READ
The printer enters the read test mode, and a read test is performed each time the [ENTER] key is pressed.
When the data of a tag can be read, it is displayed on the LCD.
When the read test failed, the following message is displayed on the LCD.
Error message
Error description
MODULE TYPE ERROR
RFID module type has been set to NONE or a
communication cannot be established.
COUNTRY CONFIG ERROR
Country code has not been set.
READ ERROR
Confirm Setting or
set other Tag.
The type of the tag to be read and one selected by the
RFID tag type selection do not match.
NOT AVAILABLE
Not supported.
NO RESPONSE
No response from the tag
READ TIMEOUT
Set a RF-Tag on Ant.
Timeout
UNKNOWN ERROR
Other errors
Note:
Only the tags selected for the RFID tag type can be read.
If the type of the tag to be read and one selected by the RFID tag type selection do not match, the read test
results in an error. Therefore, RFID tag type shall be selected before the read test is started.
<Display example>
Display
(1)
(2)
(3)
