Installing the Air Filter
1.
If you are installing a new filter, check the filter for
shipping damage. Do not use a damaged filter.
2.
Carefully slide the filter into the filter body (
).
Ensure that it is fully seated by pushing on the outer
rim of the filter while installing it.
Important:
Do not press on the soft inside area
of the filter.
3.
Install the air-cleaner cover and secure the latches
(
).
Figure 44
1.
Air-filter body
3.
Air-cleaner cover
2.
Air filter
4.
Latches
Servicing the Engine Oil
Oil Type:
High-quality detergent oil classified API Service
CD or higher for diesel engines. Do not use special additives
with recommended oils.
Crankcase Capacity:
3.7 L (3.9 US qt)
Viscosity:
See the table below
Figure 45
Preparing to Service the Engine Oil
Important:
The fasteners for the front engine panel are
designed to remain on the machine after cover removal.
Loosen all of the fasteners a few turns so that the panel
is loose but still attached, then go back and loosen them
until the panel comes free. This prevents you from
accidentally stripping the bolts free of the retainers.
Tilt the seat forward, loosen the bolts, and remove the front
engine panel (
G012347
1
1
2
Figure 46
1.
Bolt
2.
Front engine panel
38
Summary of Contents for Z Master Professional 7000Series 74264TE
Page 67: ...Schematics g012068 Wire Diagram Rev A 67...
Page 68: ...Notes 68...
Page 69: ...Notes 69...
Page 70: ...Notes 70...
