Changing the Seat Suspension
The seat is adjustable to provide a smooth and comfortable
ride. Move the seat to the position where you are most
comfortable.
To adjust it the seat, turn the seat-suspension knob either
direction to provide the best comfort (
g019768
1
Figure 29
1.
Seat-suspension knob
Unlatching the Seat
1.
Move the seat to the most rearward position. This
prevents interference when you raise the seat.
2.
Push the seat latch rearward to unlatch the seat.
3.
Raise the seat up. This allows access to the machine
under the seat (
).
Figure 30
1.
Seat latch
3.
Seat
2.
Fuel cap
Pushing the Machine by Hand
Important:
Always push the machine by hand. Never
tow the machine because hydraulic damage may occur.
Pushing the Machine
1.
Disengage the power takeoff (PTO) and turn the
ignition key to the O
FF
position. Move the levers to
the N
EUTRAL
-
LOCK
position, apply the parking brake,
and remove the key.
2.
Rotate the bypass valves counterclockwise 1 turn. This
allows hydraulic fluid to bypass the pump, enabling the
wheels to turn (
Important:
Do not rotate the bypass valves more
than 1 turn. This prevents the valves from coming
out and causing fluid to run out.
3.
Disengage the parking brake before pushing the
machine.
Changing to Machine Operation
Rotate the bypass valves clockwise 1 turn to operate machine
(
).
Note:
Do not over tighten the bypass valves.
The machine does not drive unless the bypass valves are
turned in.
Figure 31
1.
Side console controls
3.
Hydraulic pumps
2.
Bypass valve
28
Summary of Contents for Z Master Professional 7000Series 74264TE
Page 67: ...Schematics g012068 Wire Diagram Rev A 67...
Page 68: ...Notes 68...
Page 69: ...Notes 69...
Page 70: ...Notes 70...
