95
13.3
Keyboard Configuration
13.4 Operation
13.4.1 DVR/PTZ Mode conversion
y
Press System ID number (For example, ID: 001 press Num Pad
) with
button.
y
OSD will show “KBD:1” in right-bottom side that the keyboard is on DVR mode as below picture;
y
Then, user should be able to operate the DVR functions by the keyboard controller.
13.4.2 DVR Control Mode
y
In DVR control mode, all buttons are operated according to texts written underneath of each button. The functions are same
as Front buttons of DVR as follows:
-
DISPLAY: change channel split screens in sequence of 1>4>9>16>1.
-
SEQ: turn on/off Sequence function.
-
SPOT: change the channel of a screen connected to the Spot monitor.
-
ARCHIVE: pop up Archive window.
-
AUDIO/ESC: shut down window when Setup window appears. Otherwise, it activates the AUDIO function. Any setup
changes during shutdown are not saved.(same as Cancel)
-
EMERGENCY: turn on/off Emergency record function.
-
EVENT: pop up a window to see System Log.
-
PIP: turn on/off PIP screen in case of 1 channel screen. If PIP function is on, user number key(s) + ENT key to change
