35
y
Click (
) each frame on Quality column to select recording quality of a corresponding camera. User may select one of
Super, High and Std.
y
Click (
) each frame on Duration column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
y
Choose ‘OK’ to confirm the setting.
4.5.2 Schedule
y
Please click (
) RECORD>Schedule.
y
Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
y
Click (
) Camera frame to select Camera No. 1.
y
Please set the recording mode as follows:
①
Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and PreAlarm)). If user
wants to stop recording, please clear all check boxes.
②
Click block, row, column or all (square box) to register desired recording mode.
-
Click (
) a block and only the block will be registered.
-
Click (
) a row (S~H) and the entire row will be registered.
-
Click (
) a column (00~23) and the entire column will be registered.
-
Click (
) a square box (top-left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
y
Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click (
) Copy
to All Camera.
y
Below lists symbols of the respective recording modes.
Continuous
Alarm In
Alarm In / Continuous
Alarm In / PreAlarm
Motion
Motion / Continuous
Motion / PreAlarm
Motion / Alarm In
Motion / Alarm In / Continuous
Motion / Alarm In / PreAlarm
y
Choose ‘OK’ to confirm the setting.
(NOTE)
Holiday (H) registration is done with a separate menu.
4.5.3 Pre
Alarm
y
Please (
) RECORD>Pre Alarm and the following will appear.
y
Pre Alarm is effectively used when user selected recording mode by Alarm or Motion.