Topnos MDR400 User Manual Download Page 60

Page: 60 / 104

8.3.7 Alarm

Out

This is for operating Alarm Out of a selected DVR from a remote distance.

Click a channel number and Alarm Out of the corresponding channel will operate.

If user sees an intruder, use this function to turn on a siren in an area where the DVR is installed.

8.3.8 One touch Recording

Click on INSTANT RECORD button to save video of every channel in HDD of Local System (PC with CMS

installation).

8.4 PTZ Control

This is for the control of Pan/Tilt of DVR.

Click on PTZ button in Watch mode and the following screen will appear.

Buttons on the screen have the following functions.

①

Up/Down/Left/Right direction buttons

②

Up/Down/Left/Right direction buttons

①

②

③

Preset Control / Go to Preset

Zoom Out/ In

Focus Near / Far

Iris Close / Open

Summary of Contents for MDR400









































































































Search results

Summary of Contents for MDR400

Reviews:

Related manuals for MDR400

Brands by name

Popular brands

Topnos MDR400, User Manual

Search results

Summary of Contents for MDR400

Reviews:

Related manuals for MDR400

Brands by name

Popular brands