101
y
Input the title then click (
) to save.
14.5.2 Port Setting
y
Press (
) the “Port Setting” button in order to set up the port. Default values are Baud rate 2400 bps, Data Bit 5 bit, Stop Bit
1 bit, Parity None.
y
When the setup is done, press enter (
) to save the setting.
14.5.3 OSD Display
y
OSD items are to decide whether to display the information from the serial port connected to the rs232 port on OSD screen.
y
They have 4 menus as followings:
-
None : displays nothing on the OSD screen.
-
Live : displays incoming information from the serial port in real time on the OSD screen.
-
Playback : displays the saved information on the OSD screen during replay.
-
Both: displays all the information on both Live and Playback mode.
14.5.4 Pattern Setting
y
User can select the name of serial device if click (
) the keyboard button of Title.
y
When “Use” items of Numbers 1-4 are checked
5
on Serial-In page, it receives the data from the applicable serial device.
y
Check
5
the “Auto” item so as to capture automatically all the data which includes unnecessary dummy data out of serial
device as below.
y
Analyze among the automatically captured data which will be displayed or discarded then enter Pattern Setting.
-
Unless user checks “Auto” item, make sure to set up “Start Pattern” and “End Pattern”
-
“Discard Pattern”, “Line Delimiter” and “MCPL” are utilized independently, not relation to “Auto” mode.
y
It is possible to input and analyze the serial data by clicking “Pattern” after tick the “Auto” box(
□
) off.
