31
y
If user click (Default), proper number of selected PTZ will appear automatically. Please choose ‘OK’ to confirm the setting.
y
Menu, Tour and Pattern help user to use OSD function of PTZ camera.
-
PTZ camera itself supports OSD menu, use the setup value to more easily enter and use the OSD menu even in DVR.
-
If OSD enter command is 95 + PSET for example, designate 95 for Menu item,
-
If shortcut key to use Tour function is 71 ~79 + PSET, designate 70 for Tour item and
-
If shortcut key to use Pattern function is 81 ~ 89 + PSET, designate 80 for Pattern item.
-
The setting information herein is used for PAN/TILT control in 5.1.5 (to be described).
-
If click Default, basic setup values are given (i.e., Menu: 95, Tour: 70, Pattern: 80).
-
For further details on setting, please refer to the PTZ camera manual.
y
Click (
)
▲
,
▼
direction buttons on the right-hand side of the ID column to set ID number (i.e., 0 ~ 9999) of each PTZ.
y
While pressing (+) or (-) button, ID increases or decreases by 10 units.
y
Choose ‘OK’ to confirm the setting.
4.4.3 Audio
y
Please click (
) DEVICES>Audio and the following screen will appear.
y
The Audio menu will allow user to choose whether to record Audio.
y
When a check box is marked
5
on No column, corresponding audio and video are recorded. However, if the check box is
not marked, recording stops.
y
Choose ‘OK’ to confirm the setting.
4.4.4 Alarm
In
y
Please click (
) DEVICES>Alarm In and the following screen will appear.