Toolots HS-DP Series, Manual

Page: 28 / 33

28
the diameter of the work piece can set as the diameter when the part is under rotating
or printing.
Under normal circumstances, each time when the printing is completed, it should
allow the printing needle back to the appointed coordinates(generally speaking it is
the original coordinate point), the next printing will starting from this point, we call
this coodinate a "stand-by coodinate", and this coodinate position can be set freely by
clients within the marking zone.
2.6.3 Marking Operation
Start engraving: immediately start the marking process.
the marks select only for engraving: which only engraving the marks choosed from
the picture. Automatic consecutive marking: which is an appointed timing to autmatic
engraving the marks. Reset: to reset the engraving needle to the original machnical
point.
2.4.4
Isotype number comparision during the engraving.
The control software of the marking machine has possessed a comparision function
between the isotype numbers for serial number and VIN code numbers, after each
time when a normal marking is completed, the software will record the marked serial
number or the VIN number contents, every time when the client wants to print the
same content of marks, the system will flip out a warning window to require the user
for confirmation.
Here to be take attetioned is the point of, that this function is only effective to the files
which has named and saved, the the un-save temperary file contents,the engraving
software does not carry out the iso-type number comparision.
Appendix 1. The date format for character encoding