Toolots HS-DP Series, Manual

Page: 33 / 33

33
2. the limit switch line break or
damag ed Check the line or
change it
3. the control cable lack of
connection. check
The printed charactors
looks no good, or
irregular 1. the printing head is worn out,
and the gap within is big Change it
2. the belt in direction of X and
Y is loosen Adjust it
3. the machine head is worn out
and the gap is big Adjust it
4. contorl program is damaged Reinstall it
The hardware could not
get in A mistakenly configuration of
hardware in CMOS Modify the
configuration of the
CMOS
Note: Due deferent requirements initiated from our customers, deferent deployment of
the system will result on deferent failures, also It may effected by the environment
and other sections. Is the above mentioned solution can not remove your problem,
please contact our after sales team, we will do our best to solve your problem ASAP.