Tomey TMS-5, Instruction Manual

Page: 174 / 216

3-124
3.10 Analyzing in ring topo mode only
1) Press the “PreMap” button (1) on the Capture screen
after capturing images in ring topo mode to display the
PreMap screen (Fig. 3) and view all captured images
of the inspected eye.
2) Double-click the image on the PreMap screen (Fig. 3)
to display the Exam screen (Fig. 4). Double-clicking
the image on the Capture screen (Fig. 1) also displays
the Exam screen (Fig. 4).
3) The program determines the image quality and
automatically adds correction if focusing is misaligned,
and the ring scans the captured image on the Exam
screen (Fig. 4). The analyzed ring data is plotted
in green on the image of the cornea (Mire rings).
Misalignment of focusing in the X, Y, and Z axis is
indicated in the offset display at the lower right of the
screen
(Fig. 1)
(8)
(7)
Currently selected image
Displayed in the upper section
of the display area
In the order of smaller offset
misalignment
Small “1” ↔ “4” Large
The order of capturing from the
top
(Fig. 2)
(Fig. 3)