Tomey TMS-5 Instruction Manual Download Page 32

Page: 32 / 216

2-8

2.4.2 Slit mode screen

(1)

(2)

(3)

(10)

(9)

(8)

(7)

(6)

(5)

(4)

(11)

(1) Eye display [R]/[L]

Displays which side (left or right eye) the head is placed, differentiated by colors.

(2) Mode display

Displays the current capture mode.

(3) Auxiliary function display

Displays “3D scan” and “Enhanced 2D scan”, indicating normal capture, or “Calibration

Verification”, indicating a calibration check. Refer to “3.5.2 Temporary setting (Temporary)” for
how to switch this auxiliary function.

(4) Communication status with TMS-5 core software

“OK” is displayed when communication with the TMS-5 core software is normal and images
can be captured. “X” is displayed when communication with the TMS-5 core software is not
available.

Summary of Contents for TMS-5

























































































































































































































Search results

Summary of Contents for TMS-5

Reviews:

Brands by name

Popular brands

Tomey TMS-5, Instruction Manual

Search results

Summary of Contents for TMS-5

Reviews:

Brands by name

Popular brands