Tomey TMS-5, Instruction Manual

Page: 14 / 216

1-2
Do not use the instrument in a humid location or where temperature and/or
humidity fluctuate significantly. Moisture in the air may form condensation, and
measurement data and/or the optical system may be affected.
Do not connect a device with data transmission specifications that are not
compatible. Fire or electric shock may occur. Contact Tomey Corporation or
our local distributor before using the instrument while connected to another
device.
Do not hold the head, chin rest, forehead pad, or joystick when moving the
instrument. These components are detachable and the instrument may drop,
resulting in injuries.
Install the instrument in a location not subject to direct sunlight, high
temperature and humidity, or air containing dust, salt and/or sulfur. Otherwise,
failure or malfunction may occur.
Install the instrument in a leveled, stable location free of vibration or mechanical
impact. Otherwise, measurement cannot be conducted correctly. The instrument
also may topple over or fall down, resulting in fire or a serious accident.
Install the instrument between the patient and physician so that they can face
each other.
Install the instrument in a location with ample clearance from other devices to
allow smooth inspection.
Check the frequency, voltage, and allowable current (or power consumption) of
the power source.
„
Precautions before using the instrument
Check that the instrument works properly by inspecting switch and button
operations and the display.
Check that all cables are connected correctly.
Since simultaneous use of multiple devices can cause misdiagnosis or result in
a hazardous situation, exercise caution when using this instrument.
Check the sections that the patient will directly touch.
Peel off the top sheet of chin rest paper and clean the forehead pad with a
cloth dampened with alcohol before capturing images.
Check the power source (discharge condition, polarity, etc.).
Check that the instrument is correctly grounded.
Check that the date set on the personal computer conforms to the actual
operation date and time.