Tomey TMS-5, Instruction Manual

Page: 31 / 216

2-7
(5) Cone type display
Automatically recognizes and displays the cone currently attached.
(6) Communication status with TMS-5 core software
“OK” is displayed when communication with the TMS-5 core software is normal and images
can be captured. “X” is displayed when communication with the TMS-5 core software is not
available.
(7) “Set Up” button
Displays the setting screen.
(8) “Mode” button
Switches the capture mode.
Ring topo mode / Slit mode
(9) “Temp” button
Displays the temporary setting screen. Set specific conditions for the current process only.
(10) Alignment mark
Align the center of the patient's eye with this position.
(11) “Start/Stop” button
Controls the main unit of TMS to start and stop capturing.
(12) Captured data display
Displays the number of images captured on the personal computer with green dots. Up to 4
images
OD: Number of images of right eye
OS: Number of images of left eye
(13) Alignment level
Displays the alignment level currently set. This indicates that capturing conditions will be less
stringent as the lower section of the indicator turns blue. Refer to “3.5 Various settings of
main unit” for settings of the alignment level.
(14) “PP” button
Turns the picture perfect function on and off. Refer to “1.3 Glossary” for details of the picture
perfect function.
(15) “AA” button
Turns the alignment assist function on and off. Set specific conditions for the current process
only.