Tomey TMS-5, Instruction Manual

Page: 179 / 216

3-129
„
Refer to the OA-1000 Instruction Manual for details of
how to send and measure the axial length data using
the OA-1000.
When the axial length data is sent from the OA-1000 via
USB communication, the axial length data is displayed in
the information related to OKULIX. (Fig. 3, Fig. 4)
The axial length data shows the value of OptLength. If
a data type other than OptLength is selected in the OA-
1000, the axial length according to the set type is also
displayed.
The actual axial length to be used for IOL power
calculation by OKULIX is shown underlined (1).
„
The axial length data of OptLength is automatically
used for IOL power calculation by OKULIX. No
changes can be made.
Click the “Start OKULIX” button (1) to start the IOL power
calculation using OKULIX.
When the axial length data of both eyes is displayed, the
axial length data appears again if opening the examination
data of the same patient even after the analysis screen is
closed.
The axial length data is cleared when another patient is
selected in the examination list.
● OKULIX can calculate IOL power using only TMS data
even when there is no axial length data obtained by the
OA-1000. In this case, the axial length data needs to be
entered by OKULIX.
(2)
(1)
(Fig.3) (Fig.4)
(2)