Tokyo Keiki TG-8000 Series, Operator'S Manual

Page: 65 / 105

4
－
5
No. 2 gyrocompass side
Input terminals of the main power supply (between 2AC1 and 2AC2 of the
external terminal board TB201 in the power supply unit)
Voltage: 100 / 110 / 115 / 220 V AC, within
±
10 %
Frequency: 50 / 60 Hz, within
±
5 %
Input terminals of the emergency power supply (between 2B+ and 2B- of the
external terminal board TB201 in the power supply unit)
Voltage: 24 V DC, within -20 % to +30 %
(4) Automatic steering system built-in type
④
(Model PR-9
□
31D, PR-9
□
41D, PR-9
□
31E and PR-9
□
41E)
The system where the control unit for two gyrocompasses is built in the
automatic steering system, and No. 1 master compass and No. 2 master
compass are separated
No. 1 gyrocompass side
Input terminals of the main power supply (between 1AC1 and 1AC2 of the
external terminal board TB101 in the control unit)
Voltage: 100 / 110 / 115 / 220 V AC, within
±
10 %
Frequency: 50 / 60 Hz, within
±
5 %
Input terminals of the emergency power supply (between 1B+ and 1B- of the
external terminal board TB101 in the control unit)
Voltage: 24 V DC, within -20 % to +30 %
No.2 gyrocompass side
Input terminals of the main power supply (between 2AC1 and 2AC2 of the
external terminal board TB201 in the control unit)
Voltage: 100 / 110 / 115 / 220 V AC, within
±
10 %
Frequency: 50 / 60 Hz, within
±
5 %
Input terminals of the emergency power supply (between 2B+ and 2B- of the
external terminal board TB201 in the control unit)
Voltage: 24 V DC, within -20 % to +30 %
2. Confirm breaker status of the ship
’s distribution board and cable connection from
the ship
’s distribution board.
The location of the terminal board is different depending on the ship's
specification. Refer to the finished plan of this ship and the above item 1.
One gyrocompass system
Between the main distribution board and 1AC1 / 1AC2, and 1B+ / 1B- of
TB101 in the external terminal board in the control unit
Two gyrocompasses system
No. 1 gyrocompass side
Between the ship
’s distribution board and 1AC1 / 1AC2, and 1B+ / 1B- of
TB101 in the external terminal board in the control unit