Operation
EF200F-C
120
11.5 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using the Setup menu (→ See 10.4)
• Advanced settings using the Advanced setup submenu (→ See 10.5)
11.6 Performing a totalizer reset
The totalizers are reset in the Operation submenu:
• Control Totalizer
• Reset all totalizers
Navigation
"Operation" menu → Totalizer handling
Totalizer handling
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
Parameter overview with brief description
Parameter
Prerequisite
Description
Selection / User
entry
Factory setting
Control Totalizer 1 to n
A process variable is selected
in the Assign process variable
parameter (→ See 10.5.4) of
theTotalizer 1 to n submenu.
Control totalizer value.
• Totalize
• Reset + hold
• hold
• Reset + totalize
• totalize
• Hold
Totalize
Preset value 1 to n
A process variable is selected
in the Assign process variable
parameter (→ See 10.5.4) of
theTotalizer 1 to n submenu.
Specify start value for totalizer.
Dependency
The unit of the selected
process variable is
specified for the totalizer
in the Unit totalizer
parameter (→ See 10.5.4).
Signed floating-point
number
Country-specific:
• 0 m³
• 0 ft³
Reset all totalizers
‒
Reset all totalizers to 0 and
start.
• Cancel
• Reset + totalize
Cancel
►
*
Visibility depends on order options or device settings