Commissioning
EF200F-C
68
10.4.1 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a
unique designation using the Device tag parameter and thus change the factory setting.
A0029422
Header of the operational display with tag name
1
Tag name
Enter the tag name in the "FieldCare" operating tool
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter
Description
User entry
Factory setting
Device tag
Enter the name for the measuring point.
Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /).
Prowirl
10.4.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
The number of submenus and parameters can vary depending on the device version.
Certain submenus and parameters in these submenus are not described in the
Operation Instructions. Instead a description is provided in the Special Documentation
for the device (→ "Supplementary documentation" section).
Navigation
"Setup" menu → System units
System units
Volume flow unit
Volume unit
Mass flow unit
Mass unit
Corrected volume flow unit
Corrected volume unit
Pressure unit
Temperature unit
1
XXXXXXXXX
►
