EF200F-C
Commissioning
97
10.5.4 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
Totalizer 1 to n
Assign process variable
Unit totalizer 1 to n
Failure mode
Parameter overview with brief description
Parameter
Prerequisite
Description
Selection
Factory setting
Assign process variable
‒
Select process variable for
totalizer.
• Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Total mass flow
*
• Condensate mass
flow
*
• Energy flow
*
• Heat flow
difference
*
• Totalizer 1:
Volume flow
• Totalizer 2: Mass
flow
• Totalizer 3:
Corrected volume
flow
Unit totalizer 1 to n
A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
Select process variable totalizer
unit.
Unit choose list
Country-specific:
• m³
• ft³
Totalizer operation mode
A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
Select totalizer calculation
mode.
• Net flow total
• Forward flow total
• Reverse flow total
Net flow total
Failure mode
Define totalizer behavior in
alarm condition.
• Stop
• Actual value
• Last valid value
Stop
*
Visibility depends on order options or device settings
►
A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.