Tiger JKW-A10S, User Manual

Page: 29 / 106

Troubleshooting
12
IF RICE DOES NOT COOK PROPERLY
Check point
The amount
of rice,
ingredients
or water is
incorrect.
Alkali-ion
water (pH9
or above) is
used.
Mineral
water or
another hard
water is
used.
The menu
selection is
incorrect.
Timer was
selected.
After the rice
cooker was
used, the
Start key
was pressed
without first
canceling
the warming
mode.
Burned rice
or water
drops are
stuck to the
outside of
the inner pan
or to the
center
sensor.
The inner
pan is
deformed.
Symptom
Cooked
rice
Too hard
● ● ● ● ●
Too soft
● ● ● ● ● ●
Not cooked completely
● ● ● ● ●
Has hard center
● ● ● ● ●
Burned
● ● ● ● ●
During
cooking
Steam leaks
● ● ●
Boils over
● ● ●
Cooking time is too long
● ● ● ●
Refer to page 11•12•36 – – 14•17•19 – 13•16 13•26•27 –
Check point
Rice was
soaked in
water for a long
time after
rinsing.
After the rice
was rinsed, it
was left
sitting in the
strainer.
The lid is not
tightly closed.
The rice was
cooked while
mixing with
other
ingredients or
millets.
A large amount
of broken rice
was mixed in.
Cook
immediately
after the first
batch.
Insufficient
care.
Symptom
Cooked
rice
Too hard
● ● ●
Too soft
● ● ● ● ● ●
Not cooked completely
● ●
Has hard center
● ● ●
Burned
● ● ●
During
cooking
Steam leaks
● ●
Boils over
● ●
Cooking time is too long
Refer to page – – 12•26•27 11 – – 26•27
Check point
The plug was
disconnected from the
rice cooker or the
power was cut off for
an extended period.
Rice was not stirred
and loosened
properly.
Rice or other debris is
stuck to the rubber
gaskets or the edge of
the inner pan.
Rice was not rinsed
thoroughly. (excluding
Rinse-free rice)
Hot water (over 95°F/
35°C) was used to
rinse rice or adjust
water level.
Symptom
Cooked
rice
Too hard
● ● ●
Too soft
● ● ●
Not cooked completely
● ●
Has hard center
● ●
Burned
● ● ●
Smells like rice bran
●
During
cooking
Steam leaks
●
Boils over
● ●
Cooking time is too long
● ●
Refer to page 37 16 12•26•27 11•12 12
E
ng
lish