Tiger JKW-A10S, User Manual

Page: 21 / 106

7
SETTING THE TIMER
For tips on cooking,
refer to page 11.
0
4
Press the
Timer
key to select
either “Timer 1” or “Timer 2”.
Blinks
Blinks
* Rice cooker resumes last timer setting. If you like to
use same time setting, adjustment is not necessary.
Caution
● Timer-controlled cooking does not apply to
the following cases:
• “Quick”,“Mixed rice•Sweet rice”,“Stew•
Soup”.
• Each menu requires different minimum
time. If completion time is shorter than
require prior time, timer can not be set.
Refer to the list below.
Menu Minimum time
Plain rice 1 h 5 min
Brown rice 1 h 30 min
Long-grain rice 1 h 10 min
Porridge cooking time + 1 min
Oatmeal (Steel Cut) 55 min
• When “0:00” is blinking on the display
unit.
• If the inner pan has not been set in the
rice cooker.
● If the Keep warm lamp is lit, press the
Cancel
key first. The cooking timer cannot be used
when the Keep warm lamp is lit.
Each time the key is pressed, the selection changes
between [Timer 1] and [Timer 2].
Beep
Sound
● If the rice cooker is not operated within about
30 seconds after pressing the
Timer
key, a
beeping sound is emitted to notify the user.
● If the Timer or Start key is pressed when the
rice cooker is at a setting where the timer
cannot be used for cooking, a beeping
sound is emitted to notify the user.
Beep
5
Press the
Hour
and
Min
keys
to set the time to finish cooking.
* Time is displayed in 24-hour format.
This completes timer setting.
Timer lamp is turned on.
6
Press the
Start
key.
● Each press on the
Hour key changes hourly,
whereas each
Min key changes in 10-minute
intervals.
● Holding down the
Hour
or
Min
keys changes
hours or minutes rapidly.
Beep-beep
Beep
Grains other
than plain rice
Plain rice
On
On
On
* If you like to reset the timer setting, press the Cancel
button and follow the directions on page 19 step
2
.
Caution
Do not set the preset time in excess of 12 hours.
Preset times that are too long may result in
spoiled rice.
Blinks
E
ng
lish