![background image](http://html1.mh-extra.com/html/thyssenkrupp/daf-330/daf-330_operating-manual_1113951018.webp)
O
PERATING
M
ANUAL
2.
P
RODUCT
D
ESCRIPTION
ThyssenKrupp Aufzugswerke GmbH
2.6
Motor types
The standardized THYSSEN motors for machine DAF 330 described below
correspond to constructional size B3 with pulse generator.
They are frequency-controlled.
The following versions are available:
Frequency-controlled THYSSEN motors optionally available for use :
without energy recovery (with resistor)
type DAF 330 - M 001; M 003; M 005;
with energy recovery
type DAF 330 - M 002; M 004; M 006;
with rated output of: 25; 20; 17.5/16 KW
For motor data see 2.10 / 2.11
2.7
Motor connection
How to connect the motor:
Note terminal diagram on the inside of the motor terminal box and/or terminal
diagram in chapter 2.9 of this operating manual and the respective building
codes.
2.8
Pulse generator:
DAF 330 is controlled by means of an incremental hollow shaft pulse
generator mounted on the rear end of the rotor shaft. A flange-type socket
has been provided as connection to control.
For notes on installation and drawing see 7.6
Technical data for TTL generator:
Hollow shaft encoder with 2 signals with 90° phase shift and reference mark
Number of increments per rev. (Z): 16384
pulses/revolution
Supply voltage:
4...6
V
Output driver:
RS 422
Max. output frequency RS 422:
300
kHz
Push-pull output:
200
kHz
Static radial movement:
±
0.5
mm
Static axial movement:
±
0.5
mm
Working temperature range:
−
20...+70
°C
Storage temperature range:
−
30...+85
°C
Permissible relative humidity:
70
%
Loadless working current with 5 V 120
mA
Protection class: IP 00
18
Version 02/2009
DAF330