O
PERATING
M
ANUAL
9.
A
NNEX
ThyssenKrupp Aufzugswerke GmbH
5. Pressure arm
(for hydraulic jack)
Assembly:
screw pressure arm with bolt as
closely as possible to traction sheave above.
Use:
Pressure arm is used for transmitting the
force from hydraulic jack to traction sheave
6. Hydraulic jack
Assembly:
place seat of jack into drilled hole
on frame provided on tension side below the
traction sheave. Close drain plug on jack.
Move lever up and down and move pressure
arm – traction sheave – by operating the
pressure cylinder. See to it that the bolt of
the pressure arm rests on the cylinder
groove and is prevented from slipping.
1
Seat
2
Drain valve
3
Lever
4
Pressure cylinder with
groove
Use:
The hydraulic jack is used for disengaging the
car after safety gear operation
Mounted-on pressure arm incl lever.
Move in direction of arrow.
Fig. 2A
4
3
2
1
Fig. 23
Fig. 22
44
Version 02/2009
DAF330