THOMSON SpeedTouch 605 User Manual Download Page 165

Page: 165 / 212

Chapter 5

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

155

DHCP Relay

The

DHCP relay

tab allows you to add/delete and overview SpeedTouch™ 's DHCP

relay interfaces.
The DHCP relay configuration is split up in two sections:

Relay Config

To add/delete and configure a DHCP relay server on a certain interface

Relay Interfaces

To enable/disable and define the behaviour of the DHCP relay agent per
configured interface.

Relay Config

The Relay Configuration table allows you to add or delete (additional) DHCP relay
agents for a specific interface.
To create a new DHCP relay agent:

Click

New

In the

DHCP relay server

box, type the IP address of the DHCP server.

In the

Interface

list, click the appropriate relay interface (click

None

to indicate

no interface is specified).

In the

Gateway Address (giaddr)

box, type the Gateway IP address to be used

for the giaddr field in relayed DHCP packets.

Click

Apply

Relay Interfaces

The

Relay Interfaces

table allows you to configure interface specific DHCP relay

settings as:

Enable/disable the DHCP relay server

The maximum number of hops allowed for relayed DHCP requests and replies
(as indicated in the DHCP packet)

Defining whether to forward (trusted) or to drop (not trusted) DHCP request
packets when a DHCP relay agent info option is present and the Gateway IP
address field is 0 (as specified in RFC3046).

Define the remote ID (as specified in RFC3046) to allow the DHCP relay agent
to relay DHCP responses to the proper network.

Summary of Contents for SpeedTouch 605




















































































































































































































Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands

THOMSON SpeedTouch 605, User Manual

Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands