manualshive.com logo in svg

THOMSON SpeedTouch 605, User Manual

The THOMSON SpeedTouch 605 is a versatile and easy-to-use networking device. To ensure you make the most of its features, don't forget to refer to the comprehensive user manual. You can effortlessly download the manual for free from our website manualshive.com, providing all the information you need for a seamless experience.

Share
Download
background image

Chapter 5

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

149

5.4.8 PPTP-to-PPP Relay

Overview

The PPTP-to-PPP Relay, referred to as "Relay" further in this section, interacts with a 
PPTP tunneling application installed on the locally attached computers, for example 
Microsoft's Dial-Up Networking.
A typical user-relay interaction scenario is as follows: A PPTP Tunnelling application 
is started on one of the locally attached computers. This application establishes a 
PPTP tunnel to the SpeedTouch™ and is the trigger for the Relay to come into action. 
The Relay chooses a free PPPoA phonebook entry and from then on relays all PPP 
frames sourced by the PPTP application from the tunnel to the virtual channel 
identified by the phonebook entry and vice versa. At the remote end of the virtual 
channel, the BRAS extracts the PPP frames, reconstructs the encapsulated IP 
packets and forwards these to the Internet.
If, at the end of a session, the user disconnects the PPTP application, it destroys the 
tunnel and the Relay subsequently releases the virtual channel. 
Multiple users can initiate/terminate tunnels towards the Relay as long as there are 
free ATM virtual channels on the DSL Line. The maximum number of tunnels may  
however be restricted by DSL provider / ISP provisioning rules.
The SpeedTouch™ Relayed PPPoA page allows you to overview current active relay 
session, currently maintained by the SpeedTouch™.

Summary of Contents for SpeedTouch 605





















































































































































































































Reviews:

No comments

Related manuals for SpeedTouch 605

3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Brand: 3Com Pages: 4
Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Brand: ICP DAS USA Pages: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Brand: ICP DAS USA Pages: 24
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Brand: ICP DAS USA Pages: 4
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
Far Tools MR 40PB Original Manual Translation preview
MR 40PB
Brand: Far Tools Pages: 24
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Brand: B&B Electronics Pages: 47
Mellanox Technologies ConnectX-3 Pro MCX349A-XCCN User Manual preview
ConnectX-3 Pro MCX349A-XCCN
Brand: Mellanox Technologies Pages: 35
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Brand: Dahua Pages: 452
Supero AOC-USAS-H8ir User Manual preview
AOC-USAS-H8ir
Brand: Supero Pages: 54
Inter-m S- Media Manual preview
S- Media
Brand: Inter-m Pages: 20
TP-Link TL-WR703N Quick Installation Manual preview
TL-WR703N
Brand: TP-Link Pages: 17
SonicWALL Internet Security Appliances Administrator'S Manual preview
Internet Security Appliances
Brand: SonicWALL Pages: 293
Meridian Meridian 1 Option 11C Mini Technical Reference Manual preview
Meridian 1 Option 11C Mini
Brand: Meridian Pages: 546
Quamtum HotSpot HS2 User Manual preview
HotSpot HS2
Brand: Quamtum Pages: 42
Data-Tronix DT-ATSC-IP-8 User Manual & Installation Manual preview
DT-ATSC-IP-8
Brand: Data-Tronix Pages: 15

Brands by name

Popular brands

Load more brands