THOMSON SpeedTouch 605 User Manual Download Page 197

Page: 197 / 212

Chapter 7

Software Upgrade

E-DOC-CTC-20050429-0104 v1.0

187

Upgrade procedure

In the

Welcome to the SpeedTouch Upgrade Wizard

window, click

Next

The SpeedTouch™

Software License Agreement

window appears.

You must accept before continuing. Click

Yes

to accept.

The SpeedTouch™ Upgrade Wizard will search for the SpeedTouch™ on the
network. A progress bar is displayed.

The SpeedTouch™ Upgrade Wizard should find your SpeedTouch™ device on
the local network. This is indicated by the following window:

If more than one device is found, a list of available devices will be provided. If
this is the case, select your SpeedTouch™ device and click

Next

Enter your SpeedTouch™ security

User name

and

Password

If you accepted this License Agreement in a previous upgrade, this
window will not be shown.

If the wizard does not find any SpeedTouch™ on the network an error
window appears, refer to

“8.1.3 Upgrade Troubleshooting” on

page 195

It is NOT possible to upgrade your SpeedTouch™ over a wireless
connection.

Summary of Contents for SpeedTouch 605




















































































































































































































Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands

THOMSON SpeedTouch 605, User Manual

Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands