manualshive.com logo in svg

THOMSON SpeedTouch 605, User Manual

The THOMSON SpeedTouch 605 is a versatile and easy-to-use networking device. To ensure you make the most of its features, don't forget to refer to the comprehensive user manual. You can effortlessly download the manual for free from our website manualshive.com, providing all the information you need for a seamless experience.

Share
Download
background image

Chapter 5

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

157

5.5.2 DNS

Overview

DNS is short for Domain Name System. It is a network functionality that allows 
network members to use host names rather than IP addresses for referencing 
networked computers.

The DNS web page consists of two sections:

Configuration

Hostname Table

Configuration

In addition to the host name, a local computer needs the DNS domain name to 
construct a fully qualified name. By default the SpeedTouch™ DNS's domain name is 
lan. You can specify another (sub)domain name in the domain field (and 

Apply

)

In normal conditions you should never disable the SpeedTouch™ DNS server, surely 
not in case the SpeedTouch™ DHCP server is active on the local network as well. If 
required however, you can disable the SpeedTouch™ DNS server by clearing 

Activate 

Server

 (and 

Apply

).

Hostname Table

The 

Hostname Table

 shows all DNS host names (with respective IP address) the 

SpeedTouch™ DNS server is aware of (for example entries created via DHCP server 
replies to leases).
If not all computers reveal their hostname in the DHCP request, or even worse if they 
do not support DHCP, static entries can be added to the local DNS database.
Proceed as follows:

1

Click 

New

.

2

In the 

Hostname

 field, type the name you want to associate to the specified IP 

address.

3

In the 

Address

 box, type the IP address of the computer.

4

Click 

Add

.

Disabling the SpeedTouch™ DNS server will disable all DNS forwarding 
functionality as well. This may compromise end-to-end connectivity through 
the SpeedTouch™ connections.

!

Make sure to keep the database consistent.

Summary of Contents for SpeedTouch 605





















































































































































































































Reviews:

No comments

Related manuals for SpeedTouch 605

4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
IBM E12 Quick Reference Manual preview
E12
Brand: IBM Pages: 4
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
Dazzle Hollywood DV-Bridge User Manual preview
Hollywood DV-Bridge
Brand: Dazzle Pages: 63
peplink balance ONE Manual preview
balance ONE
Brand: peplink Pages: 2
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
Optostar OP-8000-EDFA-1U Series Manual preview
OP-8000-EDFA-1U Series
Brand: Optostar Pages: 9
TVT Digital TD-3316B4-16P-A1 Quick Start Manual preview
TD-3316B4-16P-A1
Brand: TVT Digital Pages: 2
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4
F.F. Group RO 1600 PLU Original Instructions Manual preview
RO 1600 PLU
Brand: F.F. Group Pages: 56
Sierra Wireless AirCard 750 Installation preview
AirCard 750
Brand: Sierra Wireless Pages: 2
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Brand: EXAGATE Pages: 7
Gtran Wireless DotSurfer GPC-2100 User Manual preview
DotSurfer GPC-2100
Brand: Gtran Wireless Pages: 44
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
Allied Telesis AT-TN109-A Specifications preview
AT-TN109-A
Brand: Allied Telesis Pages: 2
Dahua DHI-NVR5208-4KS2 User Manual preview
DHI-NVR5208-4KS2
Brand: Dahua Pages: 361
Dahua NVR5208-EI User Manual preview
NVR5208-EI
Brand: Dahua Pages: 489

Brands by name

Popular brands

Load more brands