manualshive.com logo in svg

THOMSON SpeedTouch 605, User Manual, Page: 195 / 212

Share
Download
THOMSON SpeedTouch 605 User Manual Download Page 195

Chapter 7

Software Upgrade

E-DOC-CTC-20050429-0104 v1.0

185

From a PC

You can upgrade your SpeedTouch™ from a PC. 

1

To download the latest software version:

1

Click 

SpeedTouch Support Site

.

2

On the SpeedTouch™ Support Site, download the software. Remember 
the location where you save this software.

2

To upload the software to your SpeedTouch™:

1

Click 

Browse

.

2

Select the file and click 

Open

.

3

The new software is retrieved and stored on the SpeedTouch™, without 
being activated (passive build).

3

To load the new software:

1

Click 

Proceed

.

2

Your SpeedTouch™ performs firmware switch over (active build will 
become passive and vice versa), and automatically restarts and restores 
the current configuration and connections.

4

At the end of the procedure, the SpeedTouch™ returns to the Home page.

This procedure is done in steps. You will download the software image to 
your PC first. You can choose another moment to upload the software to 
your SpeedTouch™.

Summary of Contents for SpeedTouch 605





















































































































































































































Reviews:

No comments