manualshive.com logo in svg

THOMSON SpeedTouch 605, User Manual

The THOMSON SpeedTouch 605 is a versatile and easy-to-use networking device. To ensure you make the most of its features, don't forget to refer to the comprehensive user manual. You can effortlessly download the manual for free from our website manualshive.com, providing all the information you need for a seamless experience.

Share
Download
background image

Chapter 1

Your SpeedTouch™

E-DOC-CTC-20050429-0104 v1.0

7

Networking services

UPnP with NAT traversal capability:

enables game technologies (Xbox live, Direct X, and many others)

enables conferencing functions of Microsoft Messenger

Transparent bridging (IEEE802.1D)

PPPoE routing/bridging with integrated PPP Relay

PPPoA routing, PPPoA-to-PPTP relaying

Hyper-NAT with virtual server mapping (for instance for Web, FTP, Mail 
servers) and ALGs (such as NetMeeting, MSN Messenger, VPN passthrough, 
and others)

Quality of Service:

ATM QoS per PVC: CBR, VBR-rt, VBR-nrt, UBR

IP QoS

Managed Ethernet Switch with VLAN, DMZ, mirroring

Service Level Agreement services

Integrated Dynamic DNS client

Security

PAP (RFC1334), CHAP (RFC1994) for PPP session

Integrated Stateful Inspection Firewall, Intrusion Detection

Website Filtering, URL Filtering

Wireless security on SpeedTouch™608 WL/620:

64/128bit WEP encryption, WPA-PSK

Wireless client registration/access control (with physical push button)

Multi-level SpeedTouch™ access policies, Digest Authentication

SSH, SSL

Embedded IPSec Software Module (on SpeedTouch™608/608 WL/620)

Dedicated support for provider-provisioned PE-based MPLS networks

Configuration

Home Install Wizard, Easy Setup wizard

Intuitive web-based GUI (HTTP/HTTPs)

Advanced configuration via telnet/SSH, via the web-based GUI and serial 
console - Command Line Interface (CLI)

Remote management access control

Summary of Contents for SpeedTouch 605





















































































































































































































Reviews:

No comments

Related manuals for SpeedTouch 605

Eaton INDGW-X2 Manual preview
INDGW-X2
Brand: Eaton Pages: 10
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
Gbord EN-101 User Manual preview
EN-101
Brand: Gbord Pages: 8
Schrack Technik HSERG245GS Instruction Sheet preview
HSERG245GS
Brand: Schrack Technik Pages: 2
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Brand: IBASE Technology Pages: 39
NETGEAR RH328 Reference Manual preview
RH328
Brand: NETGEAR Pages: 142
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
Patton 13243D4-001 User Manual preview
13243D4-001
Brand: Patton Pages: 62
National Instruments NI 447 Series User Manual preview
NI 447 Series
Brand: National Instruments Pages: 80
Idis DR-8364F Quick Manual preview
DR-8364F
Brand: Idis Pages: 16
ExtraHop 72 TB ESU Quick Start Manual preview
72 TB ESU
Brand: ExtraHop Pages: 3
rtd IDAN-ID5915 User Manual preview
IDAN-ID5915
Brand: rtd Pages: 28
Qlogic iSR6152 Quick Start Manual preview
iSR6152
Brand: Qlogic Pages: 12
TheGreenBow IPSec VPN Client Zyxel ZyWall 10 Configuration Manual preview
IPSec VPN Client Zyxel ZyWall 10
Brand: TheGreenBow Pages: 12

Brands by name

Popular brands

Load more brands