THOMSON SpeedTouch 605 User Manual Download Page 87

Page: 87 / 212

Chapter 4

Basic Configuration

E-DOC-CTC-20050429-0104 v1.0

4.5.8 Content Level

Accessing this page

Proceed as follows:

On the

Toolbox

menu, click

Parental Control

Click

Configure

Click the

Edit

link of the content level you want to edit.

Overview

This page gives you an overview of the different categories and their rules.
Following icons indicate whether the content type is allowed or not:

Configure

This page allows you to change:

The content level name.

The content level description.

The content level configuration.

Icon

Description

The category/group is allowed

The category/group is not allowed.

The group is partly allowed.

Summary of Contents for SpeedTouch 605




















































































































































































































Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands

THOMSON SpeedTouch 605, User Manual

Search results

Summary of Contents for SpeedTouch 605

Reviews:

Related manuals for SpeedTouch 605

Brands by name

Popular brands