THOMSON SpeedTouch 605, User Manual, Page: 134 / 212

Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
124
5.3.1 IP Addresses
Overview
The
IP address table
shows all IP addresses configured on any of SpeedTouch™’s
interfaces.
In the table following information is provided per IP address:
The
Interface
to which the IP address applies
The
IP address/Netmask
(in prefix notation)
The IP address
Type
, being either:
auto
, in case the address has been automatically assigned by the
SpeedTouch™ at startup or via negotiation
extra
, in case of a manually configured IP address.
You can also assign additional new IP addresses to the SpeedTouch™ (see Add/
change an IP address ).
In case you select an IP address entry, you can:
Make changes to the IP address configuration (see Add/change an IP address )
and click
Apply
.
Click
Delete
to delete the IP address.
Add/change an IP
address
To add a new IP address to the SpeedTouch™:
1
Click
New
.
2
Select the
Interface
to which the IP address must apply.
3
Either:
Type a valid IP
address/mask
(in prefix notation).
Select
Obtain an IP address automatically
.
4
Click
Apply
to add the IP address.
To change the configuration of an existing IP address:
1
Select the IP address entry.
2
Make your changes.
3
Click
Apply
.