manualshive.com logo in svg

THOMSON SpeedTouch 605, User Manual, Page: 178 / 212

Share
Download
THOMSON SpeedTouch 605 User Manual Download Page 178

Chapter 5

Expert Configuration

E-DOC-CTC-20050429-0104 v1.0

168

5.6.1 Policy

Firewall levels

The 

Level

 list allows you to choose between the following level:

Disabled

:

All traffic is allowed to pass through your SpeedTouch™. Game and Application 
sharing is allowed by the firewall.

BlockAll:

Use this Security Level to block all traffic from and to the Internet. Game and 
Application sharing is not allowed by the firewall.

High

:

Use this Security Level to block all outgoing connections except well known 
applications (DNS, HTTP, HTTPS, FTP, TELNET, IMAP, POP) and block all 
incoming connections.  Game & Application sharing is not allowed by the 
firewall.

Medium

:

Use this Security Level to allow all outgoing connections except Windows 
protocols (Netbios, RPC, SMB) and block all incoming connections. Game and 
Application sharing is allowed by the firewall.

Standard

:

Use this Security Level to allow all outgoing connections and block all incoming 
traffic. Game and Application sharing is allowed by the firewall.

Low

:

Use this Security Level to allow all outgoing connections and block all incoming 
traffic except Internet Control Management Protocol (ICMP). Game and 
Application sharing is allowed by the firewall.

Summary of Contents for SpeedTouch 605





















































































































































































































Reviews:

No comments