2-6
Selecting Other System Components
•
Set up is simplified by a series of logically arranged set up screens.
•
Files can be stored and printed for on-line or off-line modification, and on-site or off-site
back-up.
•
Diagnostic and set up tools make system integration easy.
•
Critical information is available with complete on-line help.
•
User defined velocity, acceleration, position and torque parameters.
•
Tuning and diagnosis is aided with an on-screen dual channel digital oscilloscope.
•
On-screen meters and software tools provide rapid debugging and measurement.
Motors
The OMNIDRIVE is compatible with many motors, both Thomson motors and motors from other man-
ufacturers. Drive and motor parameters for all compatible motors are programmed into each
OMNIDRIVE at the factory.
OMNI LINK software speeds drive and motor set up by predefined parameters for each drive and motor
combination.
Refer to the Torque/Speed curves in the Thomson Motion Control Catalog and Handbook or contact your
local Thomson distributor for motor sizing and compatibility assistance.
Custom motors or motors not manufactured by Thomson may be interfaced. Contact Product Support for
assistancePhone and fax numbers for product related assistance are listed under “Applications Engineers
and Field Service” on the inside rear cover.. * (see Appendix B).
•
Power and feedback cables are potted and molded with 360 degree shielding.
•
AC line filters.
•
Breakout boards for I/O control and encoder interface.
•
TouchPad - a compact and highly portable input and display device.
European Union Requirements
OMNIDRIVEs conform to the following European Union Directives:
•
Low Voltage Directive (72/23/EEC, 93/68/EEC)
•
Electromagnetic Compatibility Directive (89/336/EEC, 92/31/EEC, 93/68/EEC)
Compliance with the EEC Directives is contingent on:
A.
Installation of AC line filters between the power source and the drive, and
B.
Use of factory authorized cables to connect motors.
“European Union EMC Directives” on page 5-4.
Use of this product with other non-CE products or in a manner inconsistent with established testing
requirements invalidates the CE registration as declared by Thomson.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com