MOTOR DRIVE FOR 2-PANEL GATES - CONNECT
EN
22
www.mythomson.com
C - INSTALLATION
3.4 - Installing the motors - for opening towards the outside of the property
• Place the mounting brackets against the posts, 14mm above the rigid part of the gate where the ends
of the pivoting arms will be fastened.
1m maximum recommended
14mm
Inner side of the property
• Use plugs and screws that are suitable for the post material (example: for concrete, use ø12mm
plugs and ø8mm lag screws with a length of 80mm). After tightening, the mounting bracket must
be completely horizontal and 14mm above the middle of the rigid part of the gate. Make sure not to
weaken the posts.
14 mm
axe du gond
view from above
