MOTOR DRIVE FOR 2-PANEL GATES - CONNECT
EN
32
www.mythomson.com
6. CONNECTIONS
• The cable run between must comply with applicable standards (NFC 15-100).
• Either the cable is 80cm deep with red warning mesh, or the cable is run through a sheath.
230Vac
Safety instructions
• All electrical connections must be performed with the power switched off (safety switch in OFF position)
and the battery disconnected.
- These connections must be made by a qualified electrician.
6.1 - The mains electricity
• Open the motor cover containing the control electronics to access the 230V power supply terminal
block. Use the insulating screw joints provided to connect the 230V power supply.
Phase
Neutral
Earth
C - INSTALLATION
