MODE Function
Pressing the
MODE
button (shaded in figures 17 and 18) once displays the first page of the
MODE
menu.
This first page consists of 6 different signal ‘processing’ modes, one of which can be selected and
temporarily applied to the currently selected input. A
right
arrow is displayed in the lower right corner of the
VFD indicating that there is an additional
MODE
page. Pressing the
A-D
button once will reveal this second
page, consisting of additional modes. Figure 17 shows the first
MODE
page and, figure 18 shows the
second.
Note
: This entire menu allows the user to audition different modes when possible. It does not store the
changed mode. Therefore when a different
INPUT
SELECT
button is pressed, or the Casablanca III is
powered down, a
MODE
that is changed using this function will revert to its default. Since each
INPUT
SELECT
button can have its own
MODE
, the default mode for that
INPUT SELECT
is stored/edited in the
SETUP
/
INPUT
menu. Please refer to page 58 (Default Mode) for information on changing and storing the
MODE
for a given
INPUT SELECT
button.
* * *
Figure 17 - Front Panel Display of the MODE Page 1 Menu
Press button
1
-
6
to select the desired mode. The corresponding LED above buttons
1
through
6
will
illuminate.
Note
: If a specific feature such as Dolby Digital, DTS or Circle Surround is not installed in the Casablanca III,
selecting it in the
MODE
menu will result in the VFD displaying the following message:
OPTION NOT
INSTALLED
.
The first 6 modes shown
in figure 17 are described below.
Matrix (
MATX
): The signal routed to the center speaker is equal to the left plus right input signals and the
mono signal routed to the surround speakers is equal to left minus right signals. Crossing over any
speaker(s) produces a sub channel.
Special Matrix (
SPCL MATX
): A mode similar to Dolby Pro Logic with more ambience retrieval in the
surround speakers. Crossing over any speaker(s) produces a sub channel.
Dolby Pro Logic (
PRO
): When
PRO
is selected, Dolby Pro Logic decoding is implemented. An incoming 2
channel signal will be routed to the front left and right speakers. Using unique formulas, the front center and
rear left and right surrounds are created from the incoming 2 channel signal. Crossing over any speaker(s)
produces a sub channel.
Dolby Digital (
DIGTL
): (Optional). When this mode is selected, Dolby Digital (AC-3 5.1) decoding is
implemented. Typically this is a discrete 5.1 (or 6) channel signal. Please refer to page 62 for additional
Dolby Digital setup options, selectable in the second page of the
SETUP
/
INPUT
submenu. If any speakers
are crossed over, their low pass signal will be routed to the applicable sub channel(s) and be mixed with the
LFE signal, if present.
42
Summary of Contents for Casablanca III
